@ArnnavKudale – Hack Club Scrapbook

Tue, Aug 27

replaced the gps with a much smaller one andddd rigid mounted my camera! github.com/blazecoding2009/freestyle-5in-drone

https://scrapbook-into-the-redwoods.s3.amazonaws.com/4d8bb861-9ed7-4374-9dfb-d91e32c325ac-image.png

https://imgutil.s3.us-east-2.amazonaws.com/2213a8e501a52bccf70fad2043f82e709e0794f3710034faa6861a183c870945/0e6e4e7e-1ac5-4eca-a130-42e3e92438da.png

Tue, Aug 27

just updated my portfolio section on my website! github.com/blazecoding2009/blazecoding2009.github.io blazecoding.xyz

https://imgutil.s3.us-east-2.amazonaws.com/338b81cbb090af817a6101372a36bfd95d1fb7e858a8ff3c8471bb778ebd8fe4/059a725c-eac9-420b-b714-b93d90d08d4f.png

Mon, Aug 26

just cleaned up both my printers and updated/upgraded their firmware and hardwrae! github.com/blazecoding2009/hypercube-klipper github.com/blazecoding2009/CR-10-Smart-Klipper

https://imgutil.s3.us-east-2.amazonaws.com/ff72c3f5b605b0066050deb4659a75be07e0a7a468a285149c4ea563de9f0f67/61a58088-e796-433d-a11b-de57279fa5d1.png

Mon, Aug 26

i added basically tested a lot and updated some hardware choices, mounting and a tons of betaflight config! github.com/blazecoding2009/freestyle-5in-drone

https://scrapbook-into-the-redwoods.s3.amazonaws.com/86ea4b31-fb2e-4483-8c90-13a9e538188c-image.png

https://imgutil.s3.us-east-2.amazonaws.com/9fd2ae42a1d048d3abbdd62b322f539e2c06f57a4e301dcd9a44855b1e0acb0e/8d05d492-4885-4206-83d0-f8e26cf1a250.png

Sun, Aug 25

i made a 5in fpv drone! ty to john cohn for helping me with this github.com/blazecoding2009/freestyle-5in-drone/tree/main

https://imgutil.s3.us-east-2.amazonaws.com/48141fbb0c262ec321de0ce0df6ae3883ce783fd70af762e4207df9a1b6884b2/5c8787d6-cc7b-425e-b51a-96dd6c9b7b86.png

Sun, Aug 25

I made a utility for #C05AB4G6PPV| reviewers! github.com/blazecoding2009/onboard-review-form-checker

https://imgutil.s3.us-east-2.amazonaws.com/19deed1fb5a3aa29df454702dd33effb37ef98ef2026e2b4e725f98b78018d5d/dd912937-875f-4312-9112-62b1831a5892.png

Sat, Aug 24

i designed my own ELRS transmitter capable of long distance transmitting to a drone github.com/blazecoding2009/elrs-tx-module it's compatible with every radio out ther

https://imgutil.s3.us-east-2.amazonaws.com/88511ea47f4c6f722d72b360abbdfeafff741a738691cd514169f82af9670219/b5b02b22-3e11-4f0c-879b-153d2e28a463.png

Mon, Aug 19

Just made my own nfc card in kicad! ty @\ryan for the help!

https://scrapbook-into-the-redwoods.s3.amazonaws.com/3d46ee8e-9237-4ff9-a9b8-40e8a5b8398b-image.png

Mon, Aug 19

added mounting holes and cleaned some stuff up github.com/blazecoding2009/Forge

https://scrapbook-into-the-redwoods.s3.amazonaws.com/71fc8e4b-c2a0-47df-b925-daf23792c2dc-image.png

Sun, Aug 18

added mounting holes cuz im special and i forgor

https://scrapbook-into-the-redwoods.s3.amazonaws.com/4333eab7-be9a-4314-960d-5d6eb3bb8d9c-image.png

Sat, Aug 17

just finished up #forge-dev's screen PCB! github.com/EmperorNumerius/Forge

https://scrapbook-into-the-redwoods.s3.amazonaws.com/757cc8df-0d0b-4110-8706-3689aaeb17aa-image.png

https://imgutil.s3.us-east-2.amazonaws.com/5a62181e3d311600e9c09280dd1268362825bbd4ace7a2b7cfea5c23b5df0750/2f31e2fd-eacc-4bb6-a457-18bfa99c7ddf.png

Thu, Aug 15

i now have actually fixed my website and aded stuff about my latest internship at DRDO-AT-DYSL!

https://scrapbook-into-the-redwoods.s3.amazonaws.com/200e6099-7d87-48bd-9572-4df31df7b140-image.png

Tue, Aug 13

just created a usb hub! 4 USB A out, 1 USB C in, supports upto 400mb up/down on each port (untested)

https://scrapbook-into-the-redwoods.s3.amazonaws.com/7f446d66-71b1-4238-9575-92fdc3e3dbb3-image.png

Mon, Aug 12

i basically fixed up my website and added a proper skills section! (i fixed smoothscrollling and the taskbar ) blazecoding.xyz

https://scrapbook-into-the-redwoods.s3.amazonaws.com/c23df8b9-6260-4ad4-9e53-5bc7021ea1ce-image.png

Sun, Aug 11

turns out that i had lots of more stuff to do and i did it! #C078GBDKC03| new pcb rev idkwhatweareonrn

https://scrapbook-into-the-redwoods.s3.amazonaws.com/8ca12c08-bdcb-4714-aeaa-634da7d8dcda-image.png

Sat, Aug 10

With Dr. Veera Brahmam, I worked on a peltier project which will allow people in high altitudes or areas with no water to be able to get drinkable water through air!

https://scrapbook-into-the-redwoods.s3.amazonaws.com/c55593ba-d89f-4f55-b32f-9f6a093a0fd6-image.png

Sat, Aug 10

for #C078GBDKC03| i wrote the firmware in klipper for it! github.com/blazecoding2009/Forge/blob/main/Firmware/klipper/printer.cfg

https://imgutil.s3.us-east-2.amazonaws.com/99e78b9b1b5c8747473e1c3419c7d6a54b2b7ce1e32057df1a01aa09cae8b0fa/4499d887-26dc-432c-a887-b9c77bae3106.png

Fri, Aug 9

I basically made a dronekit program which draws polygons in the air! I'm currently working on porting over to ros2

https://scrapbook-into-the-redwoods.s3.amazonaws.com/3b5e127d-974c-462a-9a66-fc5e6ad214d3-1000020612.jpg

Fri, Aug 9

For #arcade and #forge-dev, i recreated out PCB out of 2 layer AND swapped over to the STM32F405

https://scrapbook-into-the-redwoods.s3.amazonaws.com/6681d3f9-c58c-424f-9d15-7834e8e252bd-image-2.png

Thu, Aug 8

For #arcade and #forge-dev, i recreated out PCB out of 2 layer AND swapped over to the STM32F405

https://scrapbook-into-the-redwoods.s3.amazonaws.com/400efddf-bbf1-416f-912a-24de81cdbfe4-image.png

Thu, Aug 8

For #forge-dev and #arcade I created a 2-layer PCB version of our motherboard for cheaper manufacturing!

https://scrapbook-into-the-redwoods.s3.amazonaws.com/3dbd6478-87a8-4fd9-b36d-0c1bbc8866fc-image.png

Thu, Aug 8

For #arcade and #forge-dev I redid the motherboard with a stm32g0 and 4 layer pcb!

https://scrapbook-into-the-redwoods.s3.amazonaws.com/258f2d1c-cfb3-4b42-bf0f-d7b0b3396dfe-image.png

Fri, Aug 2

For #arcade and #sprig I created a dino game! I also added an invincibility powerup!

https://scrapbook-into-the-redwoods.s3.amazonaws.com/a905d086-7a74-4d65-a6fa-3a9390295753-image.png

Fri, Aug 2

for #forge-dev and #arcade, i redid most of our schematic and PCB for Forge, HackClubs (hopefully) next big ysws (HQ DONT BAN ME, I TOLD EVERYONE THIS ISNT OFFICIAL) routing will be done by awdev lol

https://scrapbook-into-the-redwoods.s3.amazonaws.com/1ccc3e04-9ce7-4599-88c4-9565e5036954-image.png

https://scrapbook-into-the-redwoods.s3.amazonaws.com/536aae21-7ac1-4212-a092-353125345a34-image.png

Mon, Jul 29

for #blot i just created BlotChess! A chess puzzle generator for blot! github.com/hackclub/blot/pull/756

https://imgutil.s3.us-east-2.amazonaws.com/002905c0d64b1417df4f55960c5a7e82845c19309d1ec340c0dd91b78fe0240b/ec6928f7-ae67-4ad4-9771-31b9a401ddd1.png

Sun, Jul 28

for #arcade i just made my own chrome dino game replica for sprig! sprig.hackclub.com/share/gFTfKuVp1sUxiPW0Ejw5

https://imgutil.s3.us-east-2.amazonaws.com/e05c48f1970288c4d4291e878cb3f688814742a78d194a8c78c56075b82be43e/167e7054-1f14-47d1-9b80-8cfb25487675.png

Sat, Jul 27

for #arcade i updated my website a lot and added a projects section with pop up modals! blazecoding.xyz github.com/blazecoding2009/blazecoding2009.github.io/commit/523dbdac4aa92a9d9e96962540d054a43fd26c68

https://imgutil.s3.us-east-2.amazonaws.com/6f85a8e8171d7fe0efecfbdac7c4f52f8dbeace2f1200e8059f27f463662d716/789b2396-551a-49e9-8aad-14102b3b2a18.png

Thu, Jul 25

for #arcade and #forge-dev i helped design a custom 3d printer motherboard with 4 steppers, 5 mosfets and a bunch of other cool stuff! check it out at github.com/EmperorNumerius/Forge/tree/main/Electronics/Motherboard

https://imgutil.s3.us-east-2.amazonaws.com/f82404ebafe1b89fc4da3f539cea1c67a7830dabc221a422584ea1a9cc80d878/584383a8-5aa6-4cb0-959d-52d8fa869546.png

Thu, Jun 27

for #arcade, I finished up upgrading my nozzle from a brass to hardened steel. I also got a new GDStime 3010 fan which is 2x more powerful and will stop heatcreep\

https://scrapbook-into-the-redwoods.s3.amazonaws.com/a81923dd-b716-4dcd-a9c9-f4be635fffdc-1000018903.jpg

https://scrapbook-into-the-redwoods.s3.amazonaws.com/9c70b2d4-7cc9-436b-86d4-699eee060eb5-1000018899.jpg

https://scrapbook-into-the-redwoods.s3.amazonaws.com/236a2082-d911-4f5c-949a-e19c252a12fc-1000018901.jpg

https://scrapbook-into-the-redwoods.s3.amazonaws.com/50b39166-a0e5-4e2d-a0b3-8759657800f2-image.png

Mon, Jun 24

ooh yeah #arcade and i also got strain relief using a PG7 relief thing and installed it onto it (it works so well, my wires are never dying of stress again)

https://scrapbook-into-the-redwoods.s3.amazonaws.com/e45c50fa-ecac-4a8f-8380-c8b6eb25f2de-image.png

https://scrapbook-into-the-redwoods.s3.amazonaws.com/4a99fa96-b600-454c-86ac-d1a79e5573df-image.png

Mon, Jun 24

for #arcade, i redesigned and printed out my XY joints which were bulky and not at all sturdy. after this redesign i installed them and am getting much higher Y accelerations and soon™️ x accelerations aswell once i tighten all my screws

https://scrapbook-into-the-redwoods.s3.amazonaws.com/a4bbce7f-2d23-4187-9198-91a3e94668d8-image.png

https://scrapbook-into-the-redwoods.s3.amazonaws.com/ce05efb4-1c48-48b7-afe4-ca542e0a7f97-image.png

https://scrapbook-into-the-redwoods.s3.amazonaws.com/069f8297-514e-402e-a283-5c85bd91fe10-image.png

https://scrapbook-into-the-redwoods.s3.amazonaws.com/dc67c3cd-cedd-44df-ab80-af478f807a29-image.png

Sat, Jun 22

for #blot-3d and #arcade, i started working on a custom 3d prrinter pcb, this pcb has 5 mosfets, 3 thermistor ports, 4 tmc 2209s (soon™️ buzzer and screen and 24v down to 5v/3.3v)

https://scrapbook-into-the-redwoods.s3.amazonaws.com/8833dde5-1827-4132-af88-76bfbb9082af-image.png

Thu, Jun 20

for #arcade, i just finished up a redesign of my XY joints for my printer and have light weighted them. next steps are to make them more optimized ig? and CNCable

https://scrapbook-into-the-redwoods.s3.amazonaws.com/a3462e25-a7de-4223-94d6-ad5e2411387b-image.png

Tue, Jun 11

just made a cardboard enclosure for my printer last night, it works surprisingly well and is able to reach 60c without any active heating (only bed which is passive)

https://scrapbook-into-the-redwoods.s3.amazonaws.com/3b744399-900a-4add-a0ec-aacc2307536e-image.png

https://scrapbook-into-the-redwoods.s3.amazonaws.com/bcf482ee-15a9-4d7e-932e-96a37d8991c0-image.png

https://scrapbook-into-the-redwoods.s3.amazonaws.com/3bed4b07-63c6-4d93-8c43-33aedd309d16-image.png

https://scrapbook-into-the-redwoods.s3.amazonaws.com/7c085bfa-704f-4f1d-99fa-c5ba2a3fd1aa-image.png

Thu, Jun 6

#hack-hour Just finished up my CANbus toolboard setup! Only 6 wires heading back to the mobo compared to 20! (Yeah ik, the back is messy, I'll fix it tonight)

https://scrapbook-into-the-redwoods.s3.amazonaws.com/cf1fc124-65af-4b3c-b051-e6d1c96ad885-image.png

https://scrapbook-into-the-redwoods.s3.amazonaws.com/c11f0f5d-83ab-4521-ab67-b63c679d3bc7-image.png

https://scrapbook-into-the-redwoods.s3.amazonaws.com/ec49a51a-dfd5-4a2c-9708-1fef65adba5e-image.png

Sat, Apr 27

yay

Tue, Apr 23

replaced the 2013 kk2.1.5 controller with a much more recent speedybee f405 v3 (ty @rohanth1056-U04HX9JH0BD)

https://scrapbook-into-the-redwoods.s3.amazonaws.com/03a7bf8e-11d7-4979-a5f7-e7bfa5501164-image.png

Sun, Apr 21

working on some landing feet things for my 1kg tricopter, tpu clearly takes the win here after some quite hard landings on asphalt

https://scrapbook-into-the-redwoods.s3.amazonaws.com/b9c5042d-f18c-45c4-9bfb-b53353a1a43d-image.png

https://scrapbook-into-the-redwoods.s3.amazonaws.com/4bbc4c93-f673-491a-80a2-2ff0dee9db47-image.png