@AdamTuraj – Hack Club Scrapbook

Sat, Aug 31

Added some slight animations to the Ragnohacks site github.com/ragnohacks/site/pull/2/commits/3535a1513bc15369bec5025b43c472052d35b7b0

https://imgutil.s3.us-east-2.amazonaws.com/1db97b065f3a7c9446e2cc792adec2ad9052b0caa4952b15d71ed6af7c85d854/ef08726a-2406-4bfd-bdf8-a345120ccb39.png

Thu, Aug 29

Just finished iteration 1 of the Ragnohacks PCB. I do have to make some changes with header and USB layout which will require retracing 😅 github.com/AdamTuraj/Ragnohacks-PCB/tree/e46a28241b99a61b9fbde577cace6a4bafe1f108

https://scrapbook-into-the-redwoods.s3.amazonaws.com/a9d8af7f-d249-40a2-80f4-5f48dd3b7e6c-image.png

https://imgutil.s3.us-east-2.amazonaws.com/2ed2adb7ab7167e42b5611b9e202fbdee4e3dc87d04c6d30f3020876a17ed2cd/30aa3901-de77-46f2-b634-f249d81dd697.png

Wed, Aug 28

Another good chunk of the portfolio timeline is done! github.com/AdamTuraj/adamturaj.com-rewrite/tree/b57899ab64349fe02f5f303dbc7f5107e255bbf5

https://imgutil.s3.us-east-2.amazonaws.com/d73a4e57d8fda2a944b29b424d12c02ffdf8b77f589ec99b4fdb4465c1633289/4955d245-0832-493e-ab2f-46549a770359.png

Wed, Aug 28

After lots of trial and error, I was able to get programs to compile with a custom board profile for my hackpill board. The programs ain’t running but its a good step up github.com/AdamTuraj/Arduino_Core_Hackxxxx

https://imgutil.s3.us-east-2.amazonaws.com/d84bbeec84acd1aa083ecb749d6f2455f5e5db69150e7a3be1ba6b16beaa9910/cacd03fc-c8f2-4120-95bb-5383eea9491a.png

Wed, Aug 28

I was able to read registers on my DRV8323 dev board I made! Still having issues writing but still a large accomplishment to the issues I was having before github.com/AdamTuraj/DRV8323_Testing

https://imgutil.s3.us-east-2.amazonaws.com/d73a4e57d8fda2a944b29b424d12c02ffdf8b77f589ec99b4fdb4465c1633289/61961af7-a796-4889-8f48-8511b38ce75f.png

Wed, Aug 28

github.com/AdamTuraj/port-discovery-script Last month I made a simple script that detects a port by sending a UART command. It will break your terminal session

https://imgutil.s3.us-east-2.amazonaws.com/d73a4e57d8fda2a944b29b424d12c02ffdf8b77f589ec99b4fdb4465c1633289/edaf4a98-b134-4af9-a45b-91fb0c5effaf.png

Mon, Aug 26

I also finished the part selection for my bigger hackboard github.com/AdamTuraj/Hackboard/tree/bb211c0f2ea0bd0496b93ca4a7777f7133066877

https://imgutil.s3.us-east-2.amazonaws.com/b02eb371c587674e12e7e8ce92ea836b7c8a6b544dc3f48505cd9f6288c76036/ac97c979-e762-4453-8520-944a1a948ad8.png

Mon, Aug 26

Quickly made the README for my Hackpill github.com/AdamTuraj/Hackpill/tree/8e16bec5cb69f821c287edb4d7d02274d3de0026

https://imgutil.s3.us-east-2.amazonaws.com/bfaf5c6f393a29d6b8b79df58196ca50ea4bd4638073c1f881df7086409f1d96/8b9f6137-fcf9-4245-8304-ef8697ed1f5d.png

Mon, Aug 26

Redesign #4 now I think lol github.com/AdamTuraj/Hackboard/tree/6cf0ce6d9523aefdc9cd1cc03d56e5ff0ef149b7

https://scrapbook-into-the-redwoods.s3.amazonaws.com/807d3265-0553-4d63-8d81-0d34cd98764b-image.png

https://imgutil.s3.us-east-2.amazonaws.com/f7c940b59f7fd09a43e3c01f9294fc8d8910e8a69344663182306de3b1685548/1e994661-5527-4505-a775-57d42cf80310.png

Sun, Aug 25

Finished the re redesign of my Hackboard and made the README something github.com/AdamTuraj/hackboard/tree/efa33314e6317304b6854e12ae81c162df7337b9

https://scrapbook-into-the-redwoods.s3.amazonaws.com/76f64be4-6191-417d-8d1a-f21a8a6dce69-3d_view.png

https://imgutil.s3.us-east-2.amazonaws.com/0b2ad9fd00386f53f359ef61c2793d6a329d33e689c7387ad1994d6233cc165e/d6ecf9b6-d06a-4b88-b2c8-22a9b5aa2015.png

Sat, Aug 17

Just finished the slideshow for my workshop tonight! github.com/AdamTuraj/PCB-Design-Workshop Live link: docs.google.com/presentation/d/1G1Jw4oj45SQn5EHUhpgOhmB2w6NSv5a7nwz8cfu3VZY/edit?usp=sharing Anyone who is participating in the event please don’t spoil it for yourself

https://scrapbook-into-the-redwoods.s3.amazonaws.com/b4b3ce07-7287-4ae2-b094-25516fa5f329-image.png

https://imgutil.s3.us-east-2.amazonaws.com/eb2d37c4955254894dcd65bbd75a39d4e1dd1d1793833eff2db761e7475ac3bf/a67e52f6-41bd-4438-81be-37e0bf4a9148.png

Fri, Aug 16

Just finished making improvements to my board, just finished creating the onboard PR. Just going to be under the $50 of my remaining grant github.com/AdamTuraj/Hackpill/commit/f4d380e40bc9929d8da3da89cd12d0a08f2404d6

https://scrapbook-into-the-redwoods.s3.amazonaws.com/96cc2942-1b67-46dd-a9cc-45b7f235b2bf-image.png

https://imgutil.s3.us-east-2.amazonaws.com/0274da6d098c0eb921a7f008e5a272bd9a38fe4f48f4ca0f53434347776e86de/5fc6a42f-2271-4c85-bb7a-8fa48657efa6.png

Fri, Aug 16

I made a simple mount for my sim pedals a while back github.com/AdamTuraj/sim-pedal-mount/commit/ccabe5958a0d12deb34cf0106d23215c43a622cf

https://scrapbook-into-the-redwoods.s3.amazonaws.com/c99b1249-37fb-4bde-9243-e9ec0f57db4f-image.png

https://imgutil.s3.us-east-2.amazonaws.com/750abf254f020d8788299e915e354d3906efa63a775d871c0b7aec62c6dfdceb/ff4f8b37-ab2a-4205-a1d1-96adf58f69e5.png

Fri, Aug 16

Made a blue pill like board in preparation for my workshop this weekend github.com/AdamTuraj/Hackpill

https://scrapbook-into-the-redwoods.s3.amazonaws.com/05d0c23c-2f05-415c-9185-f645ba728466-3d.png

Wed, Aug 14

Just finished the Hackboard! Took a lot of time (24 hours ish) but it’s done (just getting it reviewed now). I attached the 3d view. Going to be buying it with the grant soon and will be hand populating it. github.com/AdamTuraj/hackboard/tree/b5892c3bcb950cb33bc79217058d3fae2a558ed6

https://scrapbook-into-the-redwoods.s3.amazonaws.com/f16532c9-aa40-44bc-8565-12b8a771a1d0-3d_view.png

https://imgutil.s3.us-east-2.amazonaws.com/0b2ad9fd00386f53f359ef61c2793d6a329d33e689c7387ad1994d6233cc165e/e23b42c1-8efb-4131-ba80-c0d54afb416c.png

Sun, Aug 11

Got some luck with an old board of mine (which wasn’t working) by desoldering and resoldering all the components. I can now read the SPI registries although writing isn’t working github.com/AdamTuraj/DRV8323_Testing/commit/ac18e64be70b4274410d645c73c3e887b3c259ee

https://scrapbook-into-the-redwoods.s3.amazonaws.com/c0addf6c-0c28-435c-b427-3a79aabc2388-final_board.jpeg

https://imgutil.s3.us-east-2.amazonaws.com/d73a4e57d8fda2a944b29b424d12c02ffdf8b77f589ec99b4fdb4465c1633289/623e96fd-4711-4f59-a034-765a2f8e1476.png

Sun, Aug 4

Just finished the schematic for hackboard - github.com/AdamTuraj/hackboard/commit/cfb1f0e9560cdc07aab0f4f584452a827481f2b9

https://imgutil.s3.us-east-2.amazonaws.com/5931842c7dc39c7b2de11ffe01687664f04d9887b921217b83a2474b90fd1854/ab01f184-1f5c-4cf4-95c1-69fc11dacdb8.png

Fri, Jul 26

I think its time to upload a scrapbook lol. Here is the update. There are some small things I need to change but I’m slowly putting along github.com/AdamTuraj/adamturaj.com-rewrite/tree/7175d87a2954746b8ec7fa9bc4d86b11c5a969cc

https://imgutil.s3.us-east-2.amazonaws.com/43ef22056de84112cf106779e0136aeee94acde607a8ce71917e37d86ba29038/b7edacc3-e907-4441-986e-d68cf7168ad7.png

Fri, Jul 19

Finished the drone model, was able to get it into the scene and got the props spinning! github.com/AdamTuraj/adamturaj.com-rewrite/commit/263470fea746cac98ed5a9bd72fc7026822c30a5

https://imgutil.s3.us-east-2.amazonaws.com/d73a4e57d8fda2a944b29b424d12c02ffdf8b77f589ec99b4fdb4465c1633289/60ecd829-753c-46fb-8115-c2c42b3067bd.png

Tue, Jul 16

After 2 hours of trial and error I was able to get both a sine wave and a digital signal on the screen. This will be used for a texture for the oscilloscope in my portfolio

https://scrapbook-into-the-redwoods.s3.amazonaws.com/51fbee78-c7bb-456f-a2fc-e2e0b0e934e4-oscilloscopescreen.jpg

Tue, Jul 16

Finally after many hours got the main scene done. The only thing I want to change this is the oscilloscope screen which I have a plan for github.com/AdamTuraj/adamturaj.com-rewrite

https://imgutil.s3.us-east-2.amazonaws.com/b912ec45c843d81ddffc2907ab70e8e82c1c254f1a77906fbc699a58e79ce05c/9c284948-6828-4a53-9fa5-56d871d36b0c.png

Mon, Jul 15

I quickly made an app to calculate how well you are progressing to your goal arcade.adamturaj.com

https://scrapbook-into-the-redwoods.s3.amazonaws.com/853f8526-a6d6-4182-90ac-88a3e07dd0cd-image.png

Sat, Jul 13

Finished one of the arms for the turret I’m building github.com/AdamTuraj/turret

https://imgutil.s3.us-east-2.amazonaws.com/20a43fa63980a9e648b06c2a56df95d0af2f36cca469126a35469b0c0ca4724b/87132388-38a1-4e6c-b48f-d9e2870c1c1c.png

Wed, Jul 10

After way too long I got my PCB imported into the browser. Now I will actually start my portfolio github.com/AdamTuraj/adamturaj.com-rewrite

https://scrapbook-into-the-redwoods.s3.amazonaws.com/ce5249e0-9c6f-4a3b-ae26-3cf2f799de53-image.png

https://imgutil.s3.us-east-2.amazonaws.com/d65df6db99167bfac5b08f3341e51fb6147e0a0f05ce9878279275c85ac37f4b/49aab56d-6afe-4e40-a430-18c19df93d87.png

Sun, Jul 7

Made some stool feet for a stool my parents got. The original feet cracked within a week www.printables.com/model/935946-mistana-lonan-stool-feet-replacement

https://scrapbook-into-the-redwoods.s3.amazonaws.com/a6321e7c-49c2-4a2d-8a1a-35f6045ff611-img_6690.jpeg

Thu, Jul 4

The main design for the turret is done. During testing I’m having some issues with the parts breaking. Making small changes to hopefully allow them to survive github.com/AdamTuraj/turret/tree/TurretTest

https://imgutil.s3.us-east-2.amazonaws.com/20a43fa63980a9e648b06c2a56df95d0af2f36cca469126a35469b0c0ca4724b/816bd74e-eceb-4cc3-bfcc-7b28281d525c.png

Sun, Jun 30

The fix for the Hackclub alert was merged github.com/hackclub/site/pull/1259

https://imgutil.s3.us-east-2.amazonaws.com/ac678ebb516a64e66ba50646e80fa925fed2c44890d11d893b6aeaaa07ce921a/6b7dc9be-d5ec-4a1a-a24e-b20f8d95d6ea.png

Tue, Jun 25

github.com/AdamTuraj/reflow-oven Uploaded my Reflow Oven to Github because I forgot. I’m too lazy to properly format the repo

https://imgutil.s3.us-east-2.amazonaws.com/fdf1ac0f49063609fa44bb733d0c9e722e5e983e1ec8a8a5c0029dc4ff8678c8/0311c7a9-a225-41dc-b137-e0fe090f3423.png

Tue, Jun 25

Also finished soldering my drone FCU. Unfortunately I misaligned the MCU twice (first time I thought the indicator was the big circle) which required more baking which made the PCB not look as good

https://scrapbook-into-the-redwoods.s3.amazonaws.com/5aa9c19b-ed9f-45f3-948a-d941dd7246f2-img_6628.jpeg

Tue, Jun 25

Finished my reflow oven and it works!

https://scrapbook-into-the-redwoods.s3.amazonaws.com/9c01b527-86f8-48eb-8b30-0f02a68934f5-0abd35bc-449f-40fb-b06c-26b0fe3032c1_1_105_c.jpeg

Mon, Jun 17

Just ordered all the parts for the FCU. Here is the BOM: www.digikey.ca/en/mylists/list/2IDI53BJIY

https://scrapbook-into-the-redwoods.s3.amazonaws.com/449cff99-7893-4e62-8136-ff7701517087-image.png

Sun, Jun 16

Was finally able to solder something with my reflow oven! It may not look the best because I used too much paste (no stencil). (Also this is the first board I made a year ago. It ain’t the best)

https://scrapbook-into-the-redwoods.s3.amazonaws.com/7b2b5c8d-e9d1-4c79-88a1-ec79f703215b-img_6601.png

Sat, Jun 15

Got my reflow oven to actually follow the profile. Will be testing it with actual pcbs soon!

https://scrapbook-into-the-redwoods.s3.amazonaws.com/a3a9329d-33db-4be1-a3ed-58c08fd0889c-reflow.png

Fri, Jun 14

Finished building my reflow oven. Now just need to PID tune it. This is where I am at right now

https://scrapbook-into-the-redwoods.s3.amazonaws.com/3276967c-e2a5-45ce-aa1c-d60e1bdc9a93-reflow.png

https://scrapbook-into-the-redwoods.s3.amazonaws.com/0839227a-d525-4873-8a7a-2b4262c40045-img_6594.jpeg

https://scrapbook-into-the-redwoods.s3.amazonaws.com/499c7be6-c794-420b-afcd-2cc240f71f25-img_6595.jpeg

Thu, Jun 6

Building a DIY reflow oven. Finished doing the hardware and insulating the oven. Time to write the firmware. I will be open sourcing it after

https://scrapbook-into-the-redwoods.s3.amazonaws.com/e2797c13-ba48-4b91-a3e8-bee11941bbfe-img_6569.jpeg

https://scrapbook-into-the-redwoods.s3.amazonaws.com/d454f6d3-5536-44d4-a132-ccf25ed6ae90-img_6568.jpeg